56
C
4: S
I
HAPTER
WITCH
NSTALLATION
Figure 35 Two Switch 8807 chassis in a cabinet
Switch 8807 11U
Switch 8807 11U
(1) Blank filler panel
(3) Backward cabling frame
Guideline: The space marked in Figure 35 must be reserved, and the remaining is
at your disposal.
One Switch 8810 chassis in a cabinet
The components and their height are as follows (from bottom up):
Blank filler panel (2U)
■
Cabling frame (2U)
■
External PoE power supply (or blank filler panel if no external PoE power supply
■
is installed) (4U)
Blank filler panel (1U)
■
Back cabling frame (1U)
■
Switch 8810 chassis (14U)
■
Blank filler panel (1U)
■
Cabling frame (2U)
■
(2) Cabling frame
(4) Reserved for external PoE power supply