Factory Setting; Functions - Settings - STEINEL IR Quattro SLIM Series Manual

Factory setting

CR2025
Reach (HF only): max.
Basic brightness: OFF
Stay-ON time - light: IQ mode
Stay-ON time - HVAC: 5 min.
Switch-ON delay - HVAC: room surveillance
Twilight setting: 5
Constant light: ON
Full / semi-automatic (full): fully automatic mode
Functions – Settings
COM 1 + COM 2
Normal mode / Test mode (Test / Norm)
Test mode has priority over all bient light level, the presence
other settings on the presence detector activates the light to
detector and serves the purpose stay ON for approx. 8 sec. in
CR2025
of checking for proper working response to movement in the
order as well for testing the de- room (blue LED flashes when
CR2025
tection zone. Irrespective of am- movement is detected). All user-
Semi-automatic (Semi) / fully automatic mode (Full)
CR2025
Semi-automatic mode: (Semi)
The light now only switches OFF stays ON for the time set
automatically. Light is switched (pressing twice switches ON
ON manually. Light must be re- for 4 hours).
quested using the button and
Fully automatic mode: (Full)
The light automatically switches matic switching function. Irre-
ON and OFF in relation to bright- spective of the settings selected,
ness when someone is present. light stays ON for 4 hours after
Light can be switched ON and manually pressing the button
OFF manually at any time. This twice or switches OFF after man-
temporarily interrupts the auto- ually pressing the button once.
DIM + DALI
Constant light ON/OFF
Provides a constant level of el of brightness. As daylight
brightness. Detector measures changes, the switched-in artifi-
the prevailing level of daylight cial lighting component is ad-
and activates sufficient artificial justed accordingly. In addition to
light to achieve the required lev- the daylight component, artificial
selected settings apply in nor-
mal mode. The presence detec-
tor can also be set by means of
the blue LED without any load
CR2025
connected.
Blue LED stays ON all the time in
the 4h mode.
Blue LED stays ON all the time in
the 4h ON/OFF mode. Pressing
the button before the 4 hours
elapse returns the Presence
Control IR Quattro Slim to the
normal operating mode.
light is also switched ON and OFF
in relation to whether or not per-
sons are present.
- 20 -
Functions – Settings
COM 1 + COM 2
Twilight setting
The chosen response threshold can
be set from approx. 10 – 1000 lux.
Examples of use
Night-time mode
Corridors, foyers
Stairs, escalators, moving walkways
Washrooms, toilets, switchrooms, canteens
Sales floor, kindergartens, nursery school rooms,
sports halls
Work rooms: offices, conference and meeting
rooms, precision assembly activities, kitchens
Working areas requiring good light:
Laboratory, technical drawing, precision work
Daylight mode
Note: Depending on the site of installation, the setting may need to be corrected (e.g. Teach).
Light level is measured at the sensor.
Time setting
Stay-ON time for switching The chosen stay-ON time can be
output 1 varied from 1 min. to a maximum
Settings 5 min. / 10 min. / 15 min. of 15 min.(1 press of the button
= 1 min.). Intrinsic light is
IQ mode
The stay-ON time is self-learning The optimum time cycle is deter-
and adjusts dynamically to user mined by means of a learning
algorithm.
behaviour.
Teach mode
This memorises the current level of want the sensor to respond to
ambient brightness at which you movement from now on.
Brightness settings
min
1
2
3
4
5
>=6
max
calibrated after 3 min. When the
threshold is exceeded, the sensor
switches OFF after the stay-ON
time expires.
The shortest time is 5 min.,
the longest 20 min.
- 21 -