Kenwood XD-853 Instruction Manual page 7

Surround speakers system
Center speaker
Surround speaker
(right)
·
· ª
CENTER SPEAKER
( 6 -16 )
SURROUND SPEAKERS
( 12-16 )
How to use the speaker stabilizer (cushions)
When the surround speaker system installation is un-
stable due to the floor condition, apply the provided sta-
bilizer (cushions) on four positions on the bottom of
each speaker.
Hanging on a wall (CRS-N553 / CRS-N503)
The speakers can be hung on a wall by using the wall hanging holes on the back of the speaker.When hanging the
speakers, select a rigid and hard place on the wall which can withstand the weight of the speakers.
1. Install a screw with sufficient strength on the wall. When screwing in, leave the head and upper stem of the screw
projected by 7 to 9 mm from the wall surface.
2. Hang the speaker by inserting the screw into the wall hanging hole on the upper rear side of the speaker. Check
that the speaker are firmly mounted.
÷ Before installation, check the wall or ceiling well to confirm that it is strong enough to withstand the weight of the
speaker. KENWOOD cannot assume the responsibility against accidents caused by the drop of speaker due to
insufficient mounting strength or to any defect in installation.
÷ The wall hanging screw is not provided. Please prepare a screw that can assure enough mounting strength according
to the material and thickness (structure) of the wall where the speaker is to be hung.
÷ If the material or thickness of a wall or ceiling cannot be confirmed, consult a professional specialized in installation.
Surround speaker
(left)
ª
· ª
- +
L
R
System Name
XD-A83
XD-853
XD-803
Main Unit
1 2
Twist
Surround Speaker Unit
1 2
Twist
Before connecting the surround speakers system, be also
sure to read "Surround setting" and "Surround function".
Recommended speaker installation
It is recommended that the surround speakers are in-
stalled straight to the left and right of the listening
position or slightly behind, at a height of about 1
meter higher than the listener's ears. Each surround
speaker should be installed so that the longer sides
are horizontal.
System connection
Surround Speaker Model Name
CRS-N553
CRS-N553
CRS-N503
3 4
3 4
ip
7