Table of Contents
Advertisement
CHANNEL SPACE setting
The space between radio channels has been set to the
one that prevails in the area to which the system is
shipped. However, if the current channel space setting
does not match the setting in the area where the sys-
tem is to be used, for instance when you move from
area 1 or area 2 shown in the following table or vice
versa, proper reception of AM/FM broadcasts cannot
be expected. In this case, change the channel space
setting in accordance with your area by referring to the
following table.
Area
USA, Canada and South
1
American countries
2
Other countries
(Except for the U.S.A., Canada, U.K., Europe, and Australia)
CHANNEL
SPACE freq.
FM : 100 kHz
AM :
10 kHz
FM :
50 kHz
AM :
9 kHz
1 Select the TUNER input.
2 While holding the TUNER (BAND) key de-
pressed, turn the MULTI CONTROL jog dial to
select the system mode.
1 "FM100/AM10 kHz" STEP,
2 "FM 50 /AM 9 kHz" STEP,
F
M 1 0 0 / A M 1
0
÷ The "AM" display is variable depending on the model
(country or area), and "MW" may be displayed in
some areas.
25
Let's have sound
F
M
5 0 / A M
9
Hide quick links:
Advertisement
Table of Contents
