Kenwood XD-DV9 Instruction Manual page 58

58
DVD / CD player unit
Symptom
Playback will not start even after a title is
selected.
The viewing restriction level (RATING) can-
not be changed.
The voice or subtitle language selected in
the initial setting is not played.
No message appears on the TV screen
after a key is pressed.
Menu screen messages are not shown in
the desired language.
Audio is not reproduced in surround sound.
Inhibition icon
Symptom
The inhibition icon is displayed
and remote control is not pos-
sible.
It is prohibited by laws to duplicate, broadcast, perform in public or
rent a disc without the permission of the copyright owners.
This product incorporates copyright protection technology that is pro-
tected by method claims of certain U.S. patents and other intellec-
tual property right owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be author-
ized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Cause
÷ A viewing restriction (Parental level) has
been set for the disc.
÷ You have forgotten the viewing restriction
(Parental) password.
÷ The DVD disc being played does not contain
the recording of the selected voice or sub-
title language.
÷ The function for displaying message on the
TV screen is set to off.
÷ The menu language function (MENU) is not
set.
÷ The surround speakers are set to "Not
used" in the speaker mode [SPEAKER
SETUP function].
Cause
÷ Playback is restricted intentionally by the
software producer.
In case of difficulty
Remedy
÷ Check the viewing restriction level (Paren-
tal level) setting.
÷ Set the initial setup to the factory setup with
the following procedure.
Pull the plug from the outlet while holding
the ENTER key pressed, and then switch
the power on again after a few seconds.
÷ Use a DVD disc containing the recording of
the selected voice or subtitle language.
÷ Set Display function to on.
÷ Set the disc menu language function (MENU)
as required.
÷ Set the surround speakers to "Used" in the
speaker mode setting of initial setup
SPEAKER SETUP.
Remedy
÷ The operation is inhibited. Please try an-
other operation.
¤
º
)
∞
y
7