Kenwood XD-DV9 Instruction Manual page 49

Dolby Pro Logic Set up (continued)
7 Use the cursor left/right (2/3) key
to select the CHANNEL LEVEL ("T-
TONE OFF" or "T-TONE ON")
ENTER
Each press switches the mode.
1 "T-TONE OFF"
2 "T-TONE ON"
When T-TONE OFF has been selected :
When T-TONE OFF has been selected and the ENTER
key is pressed, the setting is completed and the
setting contents are displayed. When the ENTER key
is pressed again, the setting mode is ended and
return is made to the original display.
When T-TONE ON has been selected :
When T-TONE ON has been selected and the ENTER
key is pressed, the test noise will be heard sequentially
from the speakers.
1 "TEST L": front left speaker
2 "TEST C": center speaker
3 "TEST R": front right speaker
4 "TEST S": surround speakers
÷ When "NO" has been selected for Center speaker
setting (4) and Surround speaker setting (5) on
page 48, that speaker will not be shown and no
sound will be put out for it.
÷ When speakers with a differing volume balance are
shown, use the cursor left/right (2/3) key to adjust
the volume.
÷ When the ENTER key is pressed, the setting is com-
pleted and the setting contents are displayed. When
the ENTER key is pressed again, the setting mode is
ended and return is made to the original display.
Setting up surround mode
XD-DV9 (EN/T,M,X)
49