Miele PWM 908 Operating And Installation Instructions page 93

Only cold water is used for the main
wash.
– Warm
Hot water is also added for the main
wash.
Hot water can only be added if the
wash temperature is above 30°C
(86°F).
Program cycle times will be longer if the
machine is not connected for hot water;
this may mean that the "Time left"
display is incorrect.
First rinse
You can select the water type for the
first rinse in some programs.
– Cold (factory default)
Only cold water is used for the first
rinse.
– Warm
Hot water is also added for the first
rinse.
Final rinse
You can select the water type for the
last rinse in some programs.
– Cold (factory default)
Only cold water is used for the final
rinse.
– Warm
Hot water is also added for the final
rinse (only possible for programs with
a temperature of at least 60°C
(140°F)).
Supervisor level
Low water pressure
If the water pressure is below 100 kPa
(14.5 psi), the program will be
cancelled and the error
message Check water intake
appear.
If the on-site water pressure cannot be
increased, activating the setting
water pressure will prevent the program
from being cancelled.
Factory default: No
Automatic dispensing
Automatic dispensing via an external
dispensing system can be activated
Factory default: Off
CapDosing
You can choose whether
displayed in the program settings.
Factory default: On
will
Low
CapDosing is
93