Miele PWM 908 Operating And Installation Instructions page 85

Special programs
You can put together 5 special
programs and save them as your own
wash programs with your own
program names.
You must have already activated
Special programs under Program
packages.
Enter the name of your special program
and its basic settings into the "Special
programs" table under the "Program
chart".
– Temperature: you can select a
temperature in multiple increments
from cold to 90°C (194°F).
– Wash block: you can select one or
more wash blocks.
– Spin speed: you can select a spin
speed in increments from 600 rpm to
1,400 rpm.
Sort programs
Programs can be moved within the
program list and in the Favourites list.
Factory default: Off
Moving programs
 Touch the sensor control for the
program you want to move.
 Press and hold the sensor control
until the frame changes.
 Drag the program to the required
place.
Supervisor level
Prog. colour allocation
You can assign a colour to a Favourite
program. In the list of Favourites, each
Favourites program is given a coloured
frame, which can be adjusted.
Factory default: On
Hygiene
The Maintenance wash hygiene
is shown in the list of special
programs.
If a program at a temperature below
60°C (140°F) has been used, a request
to start the
Maintenance wash hygiene
program appears in the display.
Factory default: Off
Disinfection prog. code
A code has to be entered to cancel a
disinfection program. The code can be
modified.
The code is: 0 0 0
Make a note of your new code if you
ever change it.
program
85