Miele PWM 908 Operating And Installation Instructions page 81

Clock display
After selecting the clock format, you
can set the time of day.
Clock format
– 24 h clock
– 12 h clock
– No clock
Set
– The time can be set.
Date
The date can be set after selecting the
date format.
Date format
– DD.MM.YYYY
– YYYY.MM.DD
– MM.DD.YYYY
Date
– The date can be set.
Supervisor level
Volume
The volume for various sounds can be
changed.
– Finish tone
– Keypad tone
– Welcome tone
It can be set to one of 7 different
levels or switched off altogether.
– Fault alarm
The fault alarm can be activated or
deactivated.
Visibility parameters
Various parameters, such as the
temperature, spin speed, Extra
options, etc., are displayed when a
program is selected. You can decide
which parameters should not be
displayed. These parameters can then
not be edited during program
selection.
Factory default: all parameters are
visible (marked in orange)
Sort Extras
Under the setting
Sort Extras appears in the bottom line.
Touch the sensor control to change
the sequence of Extras (see "Arranging
programs" under "Supervisor level").
Visibility parameters ,
81