Miele PWM 908 Operating And Installation Instructions page 18

Initial commissioning
Reference to external
appliances
A reference to external hardware
appears.
 Confirm with the
Before initial commissioning, connect
the XCI box or slide a communication
module into the slot on the back of the
washing machine. The washing
machine must be disconnected from
the domestic electrical supply for this
process. Then start the
commissioning process.
Setting the display brightness
You will be asked to select the
brightness of the display.
Display brightness
Darker
 Touch the segment bars until you
reach the required level of brightness.
The selected brightness level will be
highlighted in orange.
 Confirm with OK.
The display will change to the next
setting.
18
OK sensor control.
Brighter
Setting the date
Date
September
August
July
June
May
 Place your finger on the value that
you want to change and move your
finger in the direction you want.
 Once all values have been selected,
confirm with the OK sensor control.
The display will change to the next
setting.
Confirming the time request
The following question appears in the
display:
Omit clock display?
 Touch the
If you select
the Clock display
OK
If you select
to the Clock display
25
24
23
22
21
Yes or No sensor control.
Yes , the system will skip
setting.
No , the display will switch
setting.
2021
2020
2019
2018
2017
OK