Miele PWM 908 Operating And Installation Instructions page 70

Hide thumbs Also See for PWM 908:

Installation and connection

Installation surface

A concrete floor is the most suitable

installation surface for this machine. It is

far less prone to vibration during the

spin cycle than wooden floorboards or

a surface with "soft" properties.

 The machine must be level and

securely positioned.

 To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

If installing on a wooden joist floor:

 Install the washing machine on a

plywood base (at least

70 x 60 x 3 cm / 27 9/16 x 23 5/8 x 1

3/16 in). The base should span

several joists and be bolted to the

joists and not only to the floorboards.

Useful tip: If possible, install the

machine in a corner of the room. This is

usually the most stable part of the floor.

Removing the shipping struts

 Remove the left and right caps.

1. Pull on the secured cap stoppers

2. and use a screwdriver to release the

catches at the top and bottom.

 Using the wrench supplied, turn the

left-hand shipping strut 90°.

Pwm 906