Flexitimer With Ecostart - Miele PG 8110 SmartBiz Operating Instructions Manual

FlexiTimer with EcoStart

With the FlexiTimer  you have three
options for starting the programme
using delay start. You can set the start
time or the finish time of a programme.
You can also use the
to benefit from cheaper electricity tariffs
at night.
When using the FlexiTimer function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.

To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
programme, i.e. before you activate
the FlexiTimer with OK, and also
activate the door safety lock.
function
EcoStart
Programme options
 Switch on the dishwasher with the
 button.
The Start indicator light will flash.
 Select the programme you want to
use.
 Press the  button.
You can use the  arrow buttons to
select the Start at
Back  functions.
 Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number block will be
highlighted.
You can now enter the time you want
using the  arrow buttons and
confirm with OK.
If, while you are setting the time, you do
not press any buttons for several
seconds, the display will revert to the
previous menu level. You will then have
to enter your settings again.
If the time of day (clock) display has
been switched off (see "Settings
menu, Time of day") the display will go
out after a few minutes and only the
Start indicator light will flash slowly.
Press any button to switch the display
back on again for a few minutes.
, Finish at , EcoStart or
45