Flexitimer With Ecostart - Miele G 6510 Operating Instructions Manual

FlexiTimer with EcoStart

The FlexiTimer  gives you three ways
of starting the programme by means of
delaying the start. You can set the start
time or the finish time of a programme.
You also have the option of taking ad‐
vantage of time variable economy rates
of electricity using the
When using the Delay start function,
make sure that the detergent com‐
partment is dry before adding deter‐
gent. Wipe dry with a cloth if neces‐
sary. If the compartment is wet,
powder detergent can become lum‐
py and stick to the dispenser, with
the result that it is not fully dis‐
pensed.
Do not use liquid detergent when se‐
lecting Delay start, as it can run into
the dishwasher before it is required.

To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro‐
gramme, i.e. before you activate the
FlexiTimer with OK. Also activate the
door safety lock.
function.
EcoStart
Programme options
 Switch the dishwasher on with the 
button.
The Start indicator light will flash.
 Select the programme you want.
 Press the  button.
You can use the  arrow buttons to
select the
Start at
function or
Back 
 Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number block will be highligh‐
ted.
You can now enter the time you want
using the  arrow buttons and con‐
firm with OK.
If, while you are setting the time, you do
not press any buttons for several sec‐
onds, the display will revert to the previ‐
ous menu. You will then have to enter
your settings again.
If the time of day (clock) display has
been switched off (see "Settings menu
- Time of day"), the display will go out
after a few minutes and only the Start
indicator light will flash slowly.
Press any button to switch the display
back on again for a few minutes.
, , or
Finish at EcoStart
.
59