Table of Contents
Advertisement
FlexiTimer with EcoStart
The FlexiTimer gives you three ways
of starting the program by means of de-
laying the start. You can set the start
time or the finish time of a program. You
also have the option of taking advan-
tage of time variable economy rates of
electricity using the
When using the delay start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet, pow-
der detergent can become lumpy
and stick to the dispenser, with the
result that it is not fully dispensed.
Do not use liquid detergent when se-
lecting delay start, as it can run into
the dishwasher before it is required.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gram, i.e., before you activate the
FlexiTimer with OK. Also activate the
child lock.
EcoStart
function.
Switch the dishwasher on with the
button.
The Start indicator light flashes.
Select the desired program.
Press the button.
You can use the arrow buttons to
select the
Start at
function or
Back
Confirm selection of the function you
want with OK.
The current time of day will appear and
the hour number pad will be high-
lighted.
You can now enter the time you want
using the arrow buttons and con-
firm with OK.
If, while you are setting the time, you do
not press any buttons for several sec-
onds, the display will revert to the previ-
ous menu. You will then have to enter
your settings again.
If the time of day (clock) display has
been switched off (see "Settings
menu, Time of day") the display mes-
sage will go out if you have activated a
delay start time after a few minutes
and only the Start indicator light will
flash slowly.
Press any button to switch the display
back on again for a few minutes.
Options
,
Finish at
, or
EcoStart
.
55
Advertisement
Table of Contents
