Table of Contents
Advertisement
Water hardness
The display will change to the screen
for setting the water hardness.
The unit of measurement "°dH" is
shown as "°d" on the display.
- The dishwasher must be
programmed to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
(e.g. between 1.8–2.7 mmol/l (10–
15 °dH – German scale)), always
programme the dishwasher to the
higher value (2.7 mmol/l (15 °dH) in
this example).
In the event of a fault, it will help the
service technician if you know the water
hardness of your local water supply.
Therefore, please enter the water
hardness:
____________ °dH
The dishwasher is programmed at the
factory for a water hardness level of
2.7 mmol/l (15 °dH – German scale).
Use the arrow buttons to select
the hardness you want and confirm
with OK.
See "Settings menu, Water hardness"
for more information.
Before using for the first time
Next, the information
enabled
and
Set up finished
the display.
After confirming these prompts with
OK, the messages
Add rinse aid
Add salt and rinsing agent if
necessary (see "Before using for the
first time", "Dishwasher salt" and
"Rinsing agent").
Confirm the messages with OK.
The programme selected will appear in
the display briefly and the indicator light
for the programme selected will come
on.
Then the display will show the
estimated running time for the
programme selected.
These basic settings will be saved after
the dishwasher has been through one
complete programme.
Miele@home
will appear in
and
Add salt
may appear.
21
Advertisement
Table of Contents
