Setup Steps - Vega VEGAPULS 68 Quick Setup Manual

Set parameters
Setup - Adjustment
VEGAPULS 68 • 4 ... 20 mA/HART - four-wire
5 Set up with the display and adjustment module PLICSCOM
5.2

Setup steps

1. Go to the menu "Basic adjustment" via the display and adjust-
ment module.
▶
Basic adjustment
Display
Diagnostics
Service
Info
2. Carry out the adjustment in the menu items "Min. adjustment" and
"Max. adjustment".
Max. adjustment
100.00 %
=
1.000 m(d)
2.000 m(d)
Min. adjustment
0.00 %
=
5.000 m(d)
4.000 m(d)
3. Select in the menu item "Medium" the medium of your applica-
tion, for example "Powder/Dust".
Medium
Bulk solid
4. Select in the menu item "Application" the vessel and the vessel
form, for example, "Silo".
Vessel form
Silo
Since the radar sensor is a distance measuring instrument, it is the
distance from the sensor to the product surface that is measured. To
indicate the actual level, the measured distance must be assigned to
a certain height percentage.
To perform the adjustment, enter the distance with full and empty ves-
sel, see the following example:
13