Western Digital OpenFlex F3 Series User Manual page 74

User Guide
Step 3 : Each location attribute can be assigned a value by clicking its pencil icon in the Value column.
Add the appropriate text to the field, and click the check mark to save the value. Enter all of
the values that apply.
3.1.6.6 Editing Port Information
This task provides instructions for editing the port information for the OpenFlex F3x00 and E3000 using
the OCGUI.
Step 1 : Navigate to the chassis or storage device (see
Step 2 : Click the device's Ports icon:
Figure 102: Chassis Device Ports Icon
Figure 103: Storage Device Ports Icon
The Ports information appears:
Navigating to a Device (page
3. Management
3.1 OCGUI
50)).
67