Table of Contents
Advertisement
User Guide
Figure 269: Remove Chassis
Step 9 : Install the new Chassis into the rack.
a. Carefully slide the chassis onto the rails' inward-facing flanges until the chassis mounts are
flush with the mounts on the rails:
Figure 270: Chassis Installation
b. Use a T15 Torx screwdriver to install three M5 screws in each rack ear (6 total), securing the
chassis to the vertical rack rails:
Tip: A T15 Torx screwdriver is required for this step.
3. Management
3.2 Part Replacement
153
Advertisement
Table of Contents
