Table of Contents
Advertisement
User Guide
Figure 210: BMC Module MAC Address Label
Step 3 : Install the new BMC Module into the enclosure.
a. Grasp the release handle with your forefinger on the bottom and thumb on the top of the
release latch and press the release latch with your thumb. The handle will eject from the
front of the BMC module.
Figure 211: BMC Module Release Handle Operation
b. Gently slide the BMC Module into the center chassis slot until the release handle lifts up
slightly, indicating that it is engaged with the chassis:
3. Management
3.2 Part Replacement
122
Advertisement
Table of Contents
