Table of Contents
Advertisement
User Guide
b. Use the release handle to pull the device blank out of the enclosure part way. Then grasp
the device blank from the underside to support it as you pull it the rest of the way out of
the enclosure.
Figure 261: Remove Device Blank
Figure 262: Device Blank Hand Placement
c. Remove each device blank in the same way the first was removed.
Step 6 : Remove the OpenFlex F3x00 s from the enclosure.
a. Press the release button on the front of the OpenFlex F3x00 . The release handle will eject
outward.
3. Management
3.2 Part Replacement
149
Advertisement
Table of Contents
