Table of Contents
Advertisement
User Guide
Figure 249: Secure Device Blank
d. Verify that the device blank is securely latched into the chassis by pulling on the release
handle and ensuring the device blank does not move when pulled. Reinstall the device
blank if it is not securely installed into the chassis.
e. Install each device blank in the same way the first was installed.
Step 11 : Install the PSUs into the enclosure.
a. Move to the rear of the rack, orient the PSU with the power socket located on the bottom
and insert it into the PSU slot.
Figure 250: PSU Installation
b. Verify that the PSU is fully seated and latched into the PSU slot by gently pulling on the
handle.
c. Install the remaining PSU in the same way the first was installed.
Step 12 : Install the Fan Modules into the enclosure.
3. Management
3.2 Part Replacement
143
Advertisement
Table of Contents
