Display Menu Items - RAM Commercial CHASSIS CAB 3500 2021 Owner's Manual

92 GETTING TO KNOW YOUR INSTRUMENT PANEL
4. Push and hold the right
select "Reset".
5. Push and release the down
to select "Yes," then push and release the
right arrow button to reset the Oil Life to
100%.
6. Push and release the up
exit the instrument cluster display screen.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not
start the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
D
ISPLAY
arrow button to
Push and release the up
button until the desired selectable menu icon is
arrow button
highlighted in the instrument cluster display.
Speedometer
Push and release the up
button until the speedometer menu item is
arrow button to
highlighted in the instrument cluster display.
Push and release the right
cycle the display between mph and km/h.
Vehicle Info
Push and release the up
button until the Vehicle Info menu item is
highlighted in the instrument cluster display.
Push and release the right
enter the submenus items of Vehicle Info.
Follow the directional prompts to access or
reset any of the following Vehicle Info submenu
items:
Tire Pressure

Coolant Temperature

Transmission Temperature — If Equipped

Oil Temperature

M I
ENU TEMS
or down arrow
or down arrow
arrow button to
or down arrow
arrow button to
Oil Pressure

Exhaust Brake — If Equipped

Boost Pressure — If Equipped

Diesel Particulate Filter (DPF) — If Equipped

Oil Life

Fuel Filter Life — If Equipped

Battery Voltage

Gauge Summary

Engine Hours

Off-Road
Push and release the up or down
button until the Off-Road menu icon is displayed
in the instrument cluster display. Push and
release the left or right arrow button to
scroll through the information submenus.
Drivetrain

Front Wheel Angle: displays the graphical

and numerical value of calculated
average front wheel angle from the
steering wheel orientation.
arrow