RAM Commercial CHASSIS CAB 3500 2021 Owner's Manual page 321

Can the LATCH anchorages and the seat belt be
used together to attach a rear-facing or
forward-facing child restraint?
Can a child seat be installed in the center
position using the inner LATCH lower
anchorages from the outboard seating
positions?
Can two child restraints be attached using a
common lower LATCH anchorage?
Can the rear-facing child restraint touch the
back of the front passenger seat?
Can the rear head restraints be removed?
Frequently Asked Questions About Installing Child Restraints With LATCH
No
N/A – Regular / Crew Split Rear Bench
No – Crew Full Rear Bench
No
Yes
Yes
Do not use the seat belt when you use the LATCH
anchorage system to attach a rear-facing or
forward-facing child restraint.
Booster seats may be attached to the LATCH anchorages
if allowed by the booster seat manufacturer. See your
booster seat owner's manual for more information.
Regular Cab Front/Full Bench Rear Seat: Use the seat
belt and tether anchor to install a child seat in the center
seating position.
Split Bench Rear Seat: Use the supplied center lower
anchorages to install a child restraint in the center
position.
Never "share" a LATCH anchorage with two or more child
restraints. If the center position does not have dedicated
LATCH lower anchorages, use the seat belt to install a
child seat in the center position next to a child seat using
the LATCH anchorages in an outboard position.
The child seat may touch the back of the front passenger
seat if the child restraint manufacturer also allows
contact. See your child restraint owner's manual for
more information.
The head restraints can be removed in every rear seating
position if they interfere with the installation of the child
restraint Ú page 38.
SAFETY 319
6