230
MULTIMEDIA
Setting Name
Keyboard
Touchscreen Beep
Control Screen Timeout
Navigation Next Turn Pop-ups Displayed in Cluster
Phone Pop-ups Displayed In Cluster
Fuel Saver Display
Ready To Drive Pop-ups
Units
When the Units button is pressed on the touchscreen, the system displays the different measurement options. The selected unit of measurement will
display in the instrument cluster display and Navigation system (if equipped). The available settings are:
Setting Name
US
Metric
Custom
This setting will change the keyboard type on the display. The selectable keyboards are
"ABCDEF Keyboard", "QWERTY Keyboard", and "AZERTY Keyboard".
This setting will allow you to turn the touchscreen beep on or off.
This setting allows you to set the Control Screen to turn off automatically after five seconds or
stay open until manually closed.
This setting will display navigation prompts in the Instrument Cluster Display.
This setting will display smartphone notifications and messages in the Instrument Cluster
Display.
This setting will enable fuel saver mode in the Instrument Cluster Display.
This setting will enable the Ready To Drive Pop-ups in the Instrument Cluster Display.
This setting will change the unit of measurement on the display to US.
This setting will change the unit of measurement on the display to Metric.
This setting changes the "Speed" (MPH or km/h), "Distance" (mi or km), "Fuel Consumption"
(MPG [US], MPG [UK], L/100 km, or km/L), "Pressure" (psi, kPa, or bar), "Temperature"
(°C or °F), and "Capacity" (Gal [US], Gal [UK], or L) units of measurement independently.
Description
Description