Table of Contents
Advertisement
32
GETTING TO KNOW YOUR VEHICLE
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to save up to
two different memory profiles for easy recall
through a memory switch. Each memory profile
saves desired position settings for the following
features:
Driver seat position
Easy Entry/Exit seat operation (on/off)
(if equipped)
Side mirrors
Adjustable pedals (if equipped)
A set of desired radio station presets
NOTE:
If equipped with power convex mirrors, these
mirror positions will not set as part of a
memory profile.
Your vehicle is equipped with two key fobs,
one key fob can be linked to memory position
1 and the other key fob can be linked to
memory position 2.
The driver memory settings switch is located on
the driver door, next to the door handle, and
consists of three buttons:
The set (S) button, which is used to activate
the memory save function.
The (1) and (2) buttons which are used to
recall either of two saved memory profiles.
Driver Memory Settings Buttons
P
T
M
ROGRAMMING
HE
EMORY
To create a new memory profile, perform the
following:
1. Place the vehicle's ignition in the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., driver's seat, outside
mirrors, adjustable pedals (if equipped),
and radio station presets).
3. Push the set (S) button on the memory
switch, and then push the desired memory
button (1 or 2) within five seconds.
The instrument cluster display will display
which memory position has been set.
NOTE:
Memory profiles can be set without the vehicle
in PARK.
L
A
INKING
ND
K
E
EYLESS
NTRY
Your key fob can be programmed to recall one
of two saved memory profiles by pushing the
unlock button on the key fob.
F
EATURE
NOTE:
Before programming your key fob you must
select the "Personal Settings Linked to Key
Fob" feature through the Uconnect Settings
Ú page 228.
U
T
R
NLINKING
HE
EMOTE
K
F
T
M
EY
OB
O
EMORY
Hide quick links:
Advertisement
Table of Contents
