How To Use Remote Start; Vehicle Security System - If Equipped; To Arm The System - RAM Commercial CHASSIS CAB 3500 2021 Owner's Manual

H T U R S
OW O SE EMOTE TART
Push and release the Remote Start button on the
key fob twice within five seconds. The vehicle
doors will lock, the parking lights will flash, and
the horn will chirp twice (if programmed). Then,
the engine will start, and the vehicle will remain
in the Remote Start mode for a 15 minute cycle.
Pushing the remote start button a third time
shuts the engine off.
To drive the vehicle, push the unlock button,
insert the key into the ignition, and turn to the
ON/RUN position.
All of the following conditions must be met
before the engine will remote start:
Gear selector in PARK

Doors closed

Hood closed

Hazard switch off

Brake switch inactive (brake pedal not

pressed)
Battery at an acceptable charge level

PANIC button not pushed

Fuel meets minimum requirement

Water In Fuel Indicator Light is not illuminated

Wait To Start Light is not illuminated

Malfunction Indicator Light (MIL) is not illumi-

nated
For additional functions of the Remote Start
system, see Ú page 21
WARNING!
Do not start or run an engine in a closed

garage or confined area. Exhaust gas
contains Carbon Monoxide (CO) which is
odorless and colorless. Carbon Monoxide is
poisonous and can cause serious injury or
death when inhaled.
Keep key fobs away from children. Opera-

tion of the Remote Start System, windows,
door locks or other controls could cause
serious injury or death.
GETTING TO KNOW YOUR VEHICLE
VEHICLE SECURITY SYSTEM — IF EQUIPPED
The Vehicle Security system monitors the
vehicle doors and ignition for unauthorized
operation. When the Vehicle Security system is
activated, interior switches for door locks are
disabled. If something triggers the alarm, the
Vehicle Security system will provide the
following audible and visible signals:
The horn will pulse

The turn signals will flash

The vehicle security light in the instrument

cluster will flash
T A T S
O RM HE YSTEM
Follow these steps to arm the Vehicle Security
system:
1. Make sure the vehicle's ignition is placed
in the OFF position.
For vehicles equipped with Keyless Entry,

make sure the vehicle's keyless ignition
system is OFF.
23
2