Basic zone settings
On the "Basic zone settings" screen, please follow the steps below:
[1] "Exit delay" means when a resident enters the user password to arm the IP touch, a certain
amount of time is available for the resident to leave the house without the alarm being
triggered.
[2] "Entry delay" means when the resident enters the house, there is a certain amount of time
available to enter the password to disarm the indoor station to avoid the alarm being
triggered.
[3] Set the alarm duration. The system default is 5 minutes.
[4] If the "Tamper proof switch" function is enabled, the IP touch will issue an alarm if it is
removed from the wall or its front part is dismantled from the back part. An alarm message
will be sent to the guard unit and the management software. This function will be activated
automatically when this indoor station begins being arm.
Product manual 2TMD041800D0002
Commissioning
│155