8.5.13
Remote control setting
If the "Remote setting" is enabled (default), the IP touch can be set locally or set by the
management software remotely.
If the "Remote setting" is disabled, this IP touch can only be set locally.
Please follow the steps:
[1] On the "Local settings" screen, tick/untick the checkbox "Remote setting" to enable/disable
the function.
[2] Tap "
" to exit the setting, tap "OK" to save the settings.
Note
This setting is only available on the indoor station which is set as "Master mode"
or "Independent mode".
Product manual 2TMD041800D0002
Commissioning
│109