ABB Welcome IP H8236 Series Product Manual page 139

Tick the check box "Astrofunciton", set "Not before" time and "Not after" according to the
■
actual situation.
[7] Tap "Create".
[8] Select the icon from the drop-down list.
[9] Select the timer type from the drop-down list. It can be set to "Always", "Only at vacation" or
"Not at vacation".
[10] Switch on/off the timer. The system default is "on".
[11] Tap to add a new KNX timer. A maximum of 10 times are supported for each KNX device.
[12] Tap "OK".
Product manual 2TMD041800D0002
Commissioning
│139