Table of Contents
Advertisement
8.9.7
Door status detection setting
If this function is enabled, the IP touch will send an alarm to the management software when the
door is open longer than 120 s (A sensor should first be connected to the outdoor station).
Please follow the steps below:
[1] On the "Outdoor station settings" screen, tick the check box "Door status detection" to
enable the function.
[2] If the function "Sound of local alarm" is enabled, the IP touch also sounds an alarm locally.
[3] Tap "
" to exit the setting, tap "OK" to save the settings.
Product manual 2TMD041800D0002
Commissioning
│174
Hide quick links:
Advertisement
Table of Contents
