KNX interface setting
Please follow the steps below:
[1] Tick/untick the check box to enable/disable the function.
This function must be enabled if an IPS with encryption function is used.
■
■
This function must be disabled if an IPS without encryption function is used. Then step 2
and step 3 can be skipped.
[2] If the KNXnet/IP secure function is enabled, you need to enter the tunneling password.
[3] Enter the authentication code (optional).
[4] Enter the KNX multicast address or static IP address.
[5] Tap "OK".
Product manual 2TMD041800D0002
Commissioning
│134