Connecting To A Cable Box - Toshiba RD-X2U Owner's Manual

Connections

Connecting to a cable box

Choose one of the below according to your usage of the cable box.
For watching received channels, connect to the TV via the audio/video cable.
Incoming cable
Incoming cable
Cable box
3CH
4CH
IN OUT
Incoming cable
16
RD-X2U.Prep.(E)p13-24
Cable box
3CH
4CH
IN OUT
16
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (only when you connect a cable-compatible
TV).
You will need to:
• to record a channel while watching another, select a
desired channel on the TV (only when you connect a
cable-compatible TV).
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable box.
• to record an unscrambled channel while watching a
scrambled ohannel, select a desired cable channel via
the cable box.
This set-up will allow you to:
– record any channels through the cable box.
You will need to:
• set "Cable Box/DSS" to "Use" on the "Initial Settings"
menu. page 38
• set "Output Channel" to "3CH" or "4CH" on the "Initial
Settings" menu. page 39
• select a desired cable channel via the cable box.
• while the recorder is turned off, set TV channel to the
output channel of the cable box.
9/3/02, 9:47 AM