Toshiba RD-X2U Owner's Manual page 107

MTS Broadcast Conpatibility
This recorder can receive or record MTS (Multichannel TV sound) broadcast.
By connecting the recorder to your stereo system or stereo TV, you will experience the SAP or stereo sound.
SAP (Second Audio Program broadcast:)
A separate audio program, usually broadcast in a second language with the main language.
Sounds recorded on the HDD/DVD-RAM disc
According to your setting of "SAP" on the setup menu screen, (
channels of the disc below. Set "SAP" to "On" or "Off" appropriately.
Type of receiving broadcast
Regular (monaural audio)
Stereo
Regular+SAP
Stereo+SAP
Sounds in playback
You can play SAP and/or stereo broadcasts with this reorder. Refer to steps 1 and 2 (page 54) to select a desired
audio.
Desired sound
SAP sound
Stereo sound
Notes
• Some discs allow you to change audio selections only via the disc menu. If this is the case, press the MENU button and
choose the appropriate language from the selections on the disc menu.
• When you turn on the recorder or replace a disc, the recorder returns to the initial default setting. (
Depending on the disc, the sound that is specified the disc is played back.
• When "3D (N-2-2)" (
may be negatively affected. In this instance set to "Off".
• You cannot change sound when recorded with "DVD-R Broadcast Record" function set to "On".
Output sound conversion table
Disc SOUND FORMAT
Dolby Digital
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
Linear
DVD-
PCM 96 kHz/16 bit
video
96 kHz/20 bit
disc
96 kHz/24 bit
DTS
MPEG2
VIDEO CD MPEG1
Linear PCM 44.1 kHz/16 bit
Audio
CD DTS
Dolby Digital
HDD
Linear PCM 48 kHz/16 bit
Dolby Digital
DVD-
Linear PCM 48 kHz/16 bit
RAM
MPEG2
• Do not select a connection or setting indicated as "Noise" in the above list.
*RD-X2.Ope(US)p045-062
Setting of "SAP" on the set up
screen
"On" or "Off"
"On" or "Off"
"On"
"Off"
"On"
"Off"
L, R indicators on the front panel
R (right) is on.
Both R (right) and L (left) are on.
page 124) is set to "On", channels of bilingual sound may mix, or sound pressure of linear PCM
Audio setting (
BITSTREAM
BITSTREAM/PCM DIGITAL
ANALOG 2CH JACK
AUDIO OUTPUT JACK
Bitstream 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/24 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/24 bit
Bitstream —
Bitstream 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream (Noise)
Bitstream 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
Bitstream 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
Bitstream 48 kHz/16 bit
55
page 124), the sound is recorded onto different
On-Screen Display
"SAP" "STEREO"
not lit not lit
not lit lit
lit not lit
lit not lit
lit lit
lit lit
Sound output
SAP
Stereo Sound
page 123) and output in the default setting display
ANALOG 2CH
BITSTREAM/PCM DIGITAL
ANALOG 2CH JACK
AUDIO OUTPUT JACK
Bitstream 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/24 bit
— 96 kHz/16 bit
— 96 kHz/20 bit
— 96 kHz/24 bit
Bitstream —
Bitstream 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream (Noise)
Bitstream 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
Bitstream 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
Bitstream 48 kHz/16 bit
3D (N-2-2) playback is possible (
9/3/02, 11:24 AM
Contents of recorded sound
L R
MONO MONO
STEREO
MONO SAP
MONO MONO
L + R SAP
STEREO
page 121)
PCM
BITSTREAM/PCM DIGITAL
ANALOG 2CH JACK
AUDIO OUTPUT JACK
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/24 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/24 bit
— —
48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream (Noise)
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
page 124)
55