Toshiba RD-X2U Owner's Manual page 145

LIBRARY
ENTER
PAUSE STOP
REC REC
TV
TV/VIDEO CHANNEL VOLUME
DIMMER P in P
DISPLAY
REMAIN INPUT SELECT ZOOM
TIME BAR
QUICK MENU
Notes
• Unlike High Speed Dubbing, Rate Conversion Dubbing may cause slight deterioration in picture and sound quality of
recorded content. The time required for dubbing is about the same as the playback time of the content.
• Quality will not be improved even if you select a rate higher than original content.
• Chapter marks are not copied.
• The recorder automatically inserts a black picture for a moment before and after the new title produced by this recording process.
• During Rate Conversion Dubbing, the relay recording function (
• During Rate Conversion Dubbing, the 3D (N-2-2) function (
• During Rate Conversion Dubbing, switching the audio channel is not possible.
• Audio processed under the Rate Conversion Dubbing is recorded in stereo.
• When you record a bilingual program and play it back, the main and sub sound are output at the same time. Select the sound
by pressing the AUDIO button.
• When you set "DVD-R Broadcast Record" to "Main" or "SAP" (
of the SAP program is recorded. (Stereo broadcasting is recorded as stereo).
Canceling rate conversion dubbing
Press the STOP button.
Alternatively
Press the QUICK MENU button to display the
Quick Menu then press the
Dubbing" and press the ENTER button.
Note
• A portion of content from the start of recording to the
moment you cancel dubbing will be copied.
*RD-X2.Ope(US)p083-102
CONTENT MENU
5
Confirm picture and sound rates.
To make changes, follow the procedure below.
1) Press the QUICK MENU button to display the Quick Menu.
PLAY
2) Press the
QUICK MENU
AV Record Quality:
The current settings you have made (
Press the ADJUST (
Auto Rate Selection:
The recorder automatically selects the highest possible rate,
calculating from current unoccupied volume on the disc. (This
operation does not insure full recording of any length program or
whole use of unoccupied volume.)
6
CHP DIVIDE
Press ENTER.
TIME BAR
ENTER
/ to select "Cancel
93
e.g.
CONTENT
Rate Conversion Dubbing
MENU
Quick Menu
2002/12/15 21 : 00 Ch : 3
AV Record Quality
Auto Rate Selection
Copy (Saves Original)
Auto Power Off
Exit
/ buttons to select "AV Record Quality" then
press the ENTER button.
/ ) buttons to select a desired setting.
Copying starts.
To confirm the job progress, press the TIME BAR button
to display the time bar. (The time bar cannot be copied.)
When copying is completed, the current broadcast
picture appears.
Pictures and sounds displayed during copying are for
monitoring purposes only. Recorded picture quality may
vary.
page 70) is disabled even if "Relay recording" is set to "On".
page 124) is disabled.
page 128), only a selected sound (the main or sub sound)
Turning off the power automatically after
dubbing
1) During dubbing, press the QUICK MENU button.
2) Press the /
3) Press the ENTER button.
9/3/02, 11:25 AM
(0:52:40)
Original
Copy
Original Copy Result
page 128) are listed.
buttons to select "Auto Power Off"
93