Table of Contents
Advertisement
Connections
Connecting to cable TV signal
Choose one of the setup options below to connect the recorder to your cable signal.
Connect the recorder to the TV using the audio/video cable.
Incoming cable
Incoming cable
Cable box
3CH
4CH
OUT
IN
Incoming cable
22
Cable box
3CH
4CH
OUT
IN
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (only when you connect a cable-compatible
TV).
You will need to:
• on your TV select a desired channel to watch while
recording a different channel using the recorder.
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable box.
• to record an unscrambled channel while watching a
scrambled channel, select a desired cable channel via
the cable box.
This set-up will allow you to:
– record any channels through the cable box.
You will need to:
• select a desired cable channel via the cable box.
• while the recorder is turned off, set TV channel to the
output channel of the cable box.
To download program listings the TV Guide On Screen
system needs to be able to change channels on your
cable box when the recorder is not in use. Please
connect the supplied G-LINK cable to the G-LINK jack of
the recorder. After you connect the G-LINK cable you will
be able to control your cable box using the recorder's
remote control.
page 25
Advertisement
Table of Contents
