Table of Contents
Advertisement
History depth
Value:
Interval
Path:
Min free disk
space:
Slave
Master encoder
name:
Master encoder
path:
MaxGap size:
Slave lag:
AG-7.2.B1-092414 • Restricted - customer use only
Specifies how long programs are stored. Normally streams are
stored in the local storage. However, in a case where that is
not adequate, Volicon support can configure LTS.
Numeric value specifying how many unit intervals video will be
stored. Setting this value to 0 means data is not saved.
Pulldown specifying: minutes, hours, days, weeks, months
years.
LTS storage location, typically C:Video\LTS\ if LTS is running on
the same computer.
Minimum disk space available on Archive machine before
archiving. Value is in Gigabytes.
Specify if this encoder is a backup encoder for another system.
The name of the master encoder (only relevant when backup
encoder is used).
Absolute path to the storage location of the master encoder
(only relevant when backup encoder is used).
The maximum gap size between files.
Specifies how long slave will wait before starting to archive its
content. Setting this to less than 1 week is not recommended
and may cause both master and slave to archive needlessly.
Table: Long Term Storage (LTS)
90
Advertisement
Table of Contents
