Table of Contents
Advertisement
Maximum restart
retries:
Maximum service
recoveries:
Restart period can be used to force the encoder to restart either based on uptime or at a specific
date and time.
Maximum up time
Restart time
CRON line:
Enable/Disable
Restart at:
Stop duration:
Settings – Central Server
11.3
The Setting section is used to configure Central Server behavior: channels, profiles, user accounts,
etc.
This section is broken down into six subsections:
← System – overall settings
← SNMP receivers – listening ports to receive SNMP messages
← Channel Set – logical channel grouping independent of physical encoder
← Distribution Profiles – specify how clips are exported
← Roles – specify which aspects of MIP each user role is able to access and lastly user accounts
← Users - list of all user accounts
System
11.3.1
Use this page to configure system wide global settings.
AG-7.2.B1-092414 • Restricted - customer use only
The maximum number of times the watchdog will attempt to
restart the encoder.
The maximum number of times the watchdog is allowed to
restart the entire service.
Table: Error Recovery
Restarts encoder when elapsed run time is exceeded.
Force restart at specific date and time.
Selected schedule in Cron format.
Table: Restart Period
Hibernation schedules a period when the encoder is not
recording video.
Specifies restart time.
Specifies how long the encoder is not recording.
Table: Hibernation
106
Advertisement
Table of Contents
