Set Top Box Interconnect - Verizon Volicon MIP Admin Manual

Set Top Box interconnect

8.5
If you are using a Set Top Box (STB) as an input source, assign one STB per Encoder input and
connect the output of each STB to the associated capture card input connector. Composite,
Component, and HDMI interfaces are currently supported. Currently the MIP only supports set top
box programming using the set top box remote control. Integrated Remote control capability within
the MIP is planned for a future software release.
TECH TIP
MIP is recording and logging content, as such it is only able
to support HDMI without HDCP.
Figure: Typical STB Rear Panel
55 AG-7.2.B1-092414 • Restricted - customer use only