Table of Contents
Advertisement
External switch
If an external A/V switcher is used this entry specifies which
output
switcher output port feeds the associated Encoder input
(assuming the switcher has more than one output port).
Set value to 1 if an external input switch is not used.
Restart on input
Automatically restart encoder when its input is recovered.
recovery
Relevant for BlackMagic cards only. This is done to avoid time
stamp issues.
Signal loss restart
During periods of no input the encoder will automatically
interval:
restart at the specified interval. This is done to avoid time
stamp issues.
Video device name:
Text string with card name and channel ID if the card supports
multiple channels.
ADD/DELETE
Define video input parameters. If card supports multiple input
channels each needs to be defined. Clicking add opens
another submenu.
Volicon, a division of Verizon Digital Media Services, support is
responsible for adding and deleting channels.
Video Input Misc
Connector Type
Pulldown to select video connector
Format
Pulldown to select type: i.e. PAL-B 1080i, frame rate and
resolution.
Add Format
Click to open dialog to create another format.
Video Input
Note: not yet implemented in MIP
External Switch
Remote Control
Not implemented, only supported in STB/RPM systems.
Table: Video Input Profile (Capture Card and Transport Stream)
79
AG-7.2.B1-092414 • Restricted - customer use only
Advertisement
Table of Contents
