Table of Contents
Advertisement
Host:
Port
HTTP node name
Storage node name
Program name
Close Gaps from cache:
Detect PAT/PMT events
Handle PAT/PMT events:
Handle XDS events:
Stop on scrambled:
Enable low bitrate
streams:
Table: Transport Stream Input Profile (IP Ingest Section)
IP address or URL of the program source.
IP Port address to access the program.
The name of the HTTP node as configured in the
Mediahub, for streaming data of the required PID.
The name of the Storage node as configured in the
Mediahub where data for the required PID is stored.
The name of the program to encode the TS stream.
If the encoder losses the feed it keeps recording a
black screen, until the feed comes back. In this way
downtime is represented in the recorded data.
Depreciated, no longer used.
Depreciated, no longer used.
The system will process Extended Data Services events
and log them.
Ignore encrypted streams so MIP does not generate
erroneous alerts.
Enable/Disable handling of low bitrate streams. This is
normally disabled because it may slow down recovery
in the event of connection loss. When there is almost
no payload (black video for example) this should be
enabled.
Figure: Encoder Cloud Input
81
AG-7.2.B1-092414 • Restricted - customer use only
Advertisement
Table of Contents
