Table of Contents
Advertisement
Audio codec type:
ADD/DELETE
Codec
Bitrate
Sample. rate
Amplitude
Channels
Alerting
Enable
AG-7.2.B1-092414 • Restricted - customer use only
Pulldown to specify how MIP encodes audio for
storage: AAC, WMA and WMApro. When configuring
the Audio CODEC type which describes the audio
CODEC used by this encoder it will change the COCEC
for each of the audio streams in the feed.
Allows you to create multiple audio outputs.
Pulldown to select output type: AAC, WMA9,
WMA9pro.
Audio is encoded as variable bit rate VBR). This field
sets the upper limit even if the source material results
in a higher instantaneous value.
This field accepts values from 8,000 – 96,000,
recommend value is 48,000 samples per second.
Scales the resulting output, normalized to 1 dB.
Number of audio channels to encode the output,
typically 2 channels stereo. Maximum is 48.
When alerting is checked for a specific audio stream it
enables alerts for that stream if Alerts are configured
for the encoder. Unchecking this option inhibits alerts
for this stream. This is typically used if the audio
stream does not actually contain audio.
Table: Audio Output Profile
Live stream is used to view low latency video on a monitor
page. Note: this feature is CPU intensive.
Table: Live Stream Profile
86
Advertisement
Table of Contents
