Assembly - Life Fitness INXSC Assembly Instructions Manual

Attach Rear Console Shroud Assembly
1. Insert grommets into the two holes on the back of the console support weldment.
2. Push the clips on top of the rear cover into the corresponding slots on the console support weldment.
3. Use two screws to go through the two holes on the back of the rear cover to the corresponding two grommets on
the console support weldment.
Item
1
2 M4.2 X 19 Phillips Pan Head Screw
3
Page 20 of 33
Description
Rear Cover
Grommet
1.5 Nm (13.3 in. lbs.)
Qty
1
2
2