Electrical Power Requirements; Supply); Power - Life Fitness INXSC Assembly Instructions Manual

Electrical Power Requirements (Applicable for Units Using External Power Supply)
This unit is self powered or can be used with an optional external power supply. Use of an attachable TV requires an
external 12V power supply. Use of a Discover Console requires a 24V power supply.
WARNING: Use only the supplied power brick and line cord. Do not use any modification to connect to a 2-
prong outlet. Product must be connected to a properly rated 3-prong outlet.
Console
Integrity X / Integrity C
Discover SE3 / SE3 HD /
ST
WARNING: DO NOT USE A 24VDC POWER SUPPLY WITH INTEGRITY CONSOLES!
Outlet Voltage
120 VAC
230 VAC
NOTE: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet,
have a proper outlet installed by a qualified electrician.
NOTE: Make sure the power brick cord is securely connected to the base unit. A loose connection may result in the
unit not receiving external power.
Check for Console Power
The Integrity X and Integrity C consoles are powered by a rechargeable 6-volt battery. Check the battery by pressing
the GO button. The console should beep and light up. The console will display the Life Fitness logo. If a prompt
doesn't appear, mount the unit and begin pedaling. The console should light up and programming a workout should
be possible. Pedal for 10 - 20 minutes at 50 rpm or faster during a workout for optimum battery charging. The pedal
action during workouts keeps the battery charged. Optional external power supply can be used. If the unit is externally
powered, battery maintenance is automatic and pedaling is not required. Use only the power supply provided by Life
Fitness to insure against unsafe operation.
Power Assist Option / External Power Supply
The cross-trainer's optional Power Assist feature makes it possible for the console to be powered by an external
electrical source. This eliminates the need to pedal at a minimum speed to supply constant power to the console. With
this option, users who use the cross-trainer for rehabilitative exercise may pedal at a rate below the minimum without
losing console power.
Plug the power to the external power connector on the front end of the cross-trainer. Plug the cord into an AC outlet.
Use only the external power supply provided by Life Fitness in order to insure against unsafe operation.
CAUTION: Connectors should easily fit into the receptacles. Forcing a connection may lead to damage to the
barrel connector and/or receptacle and may void product warranty. If the power supply barrel doesn't fit easily
into the receptacle then the wrong power supply is being used.
The Power Assist feature option requires an optional kit. Contact Life Fitness Customer Support Services to order the
kit.
Supply Voltage Frequency
95 - 264 VAC 47 - 63 Hz
95 - 264 VAC 47 - 63 Hz
Commercial Units Outlet &
Breaker (Amps)
20 (no more than 10 cross-trainers
per breaker for Integrity; 5 cross-
trainers per breaker for Discover)
12 (no more than 10 cross-trainers
per breaker for Integrity; 5 cross-
trainers per breaker for Discover)
Page 9 of 33
Output Voltage Output Current
12 VDC 5 A
24 VDC 2.5 A
Consumer / Home Units Outlet &
Breaker (Amps)
15 (no more than 8 cross-trainers
per breaker for Integrity; 4 cross-
trainers per breaker for Discover)
12 (no more than 8 cross-trainers
per breaker for Integrity; 4 cross-
trainers per breaker for Discover)