Attach Deadshaft; Covers - Life Fitness INXSC Assembly Instructions Manual

Attach Deadshaft Covers
1. Secure rear deadshaft cover to rocker arm using one screw.
2. Add grommets to rear deadshaft cover. Interlock the front deadshaft cover into the rear deadshaft cover.
3. Secure the front deadshaft cover to the rear deadshaft cover using two screws and two grommets.
4. Position the gasket on top of the covers.
Item
1
2 M6 X 16 Phillips Pan Head Screw
Item
1
2
Item
1 M4.2 X 19 Phillips Pan Head Screw
2
NOTE: Repeat the procedure reversing front and rear
deadshaft covers for the remaining rocker arm. The
front cover used on the first rocker arm becomes the
rear cover on the remaining rocker arm.
Page 30 of 33
Description
Deadshaft Cover, Rear
1.5 Nm (13.3 in. lbs.)
Description
Deadshaft Cover, Front
Grommet
Description
Gasket (already attached)
1.1 Nm ( 9.7 in. lbs.)
Qty
2
2
Qty
2
4
Qty
4
2