Handling The Device - Advantech-DLoG DLT-V6210 Manual

Risk of accident on the targeted objects due to unstable attachment of DLT-V6210.
5.1.3.

Handling the device

Hazardous voltage, electrical shock from contacting with live parts.
Risk of injury due to weight and sharp-edged parts.
DLT-V6210 can fall down and cause injuries due to its weight.
The strain relief rail can have sharp edges and cause cutting injuries.
NOTICE: Physical damage
Damage and scratching of the touchscreen without transportation protective film.
The front display of DLT-V6210 is protected during transportation by a transparent film. This film
should remain on the front display during assembly to avoid damage to the front display surface.
Page 16 / 56
WARNING

When installing DLT-V6210, make sure that no one will be injured if the
bracket breaks (e.g. because of a stress fracture).

Alternatively you can put appropriate safety measures in place (e.g. install a
security cable in addition to the mounting bracket).
WARNING

Do not put DLT-V6210 into operation if it is visibly damaged.

Do not open or modify DLT-V6210.
WARNING

Always hold DLT-V6210 by the housing with both hands.

Never use the antenna cap as a handle. It can break due to the weight
involved.

Do not hold DLT-V6210 by the strain relief rail.

Use the assistance of a second person for installation work.

Only remove the film after all of the installation work has been completed.
DLT-V6210 Manual V1.00 Advantech-DLoG