Device Configuration Using Software Tools; Configuring The Front Keys, Automatic Shut Down, Etc; Wi-Fi Configuration (Optional); Radio Wave Emission Hazards - Advantech-DLoG DLT-V6210 Manual

4. Device configuration using software tools

Risk of injury and damage due to improper configuration.
These instructions are directed to skilled personnel.
If DLT-V6210 is incorrectly configured, the DLoG GmbH warranty for this device will be void.
4.1.

Configuring the front keys, automatic shut down, etc.

The MDevice software is used to configure DLT-V6210 devices with Microsoft Windows operating
system.
Configuration examples:

Automatic shut down

Network settings
4.2.

Wi-Fi configuration (optional)

Depending on the optional equipment and intended use of DLT-V6210, the settings and access data for
Wi-Fi networks should be defined.
4.2.1.

Radio wave emission hazards

This information applies exclusively to DLT-V6210 devices that are equipped with wireless technology.
Excessive radio wave emission due to incorrect Wi-Fi configuration.
Risks to health are possible due to excessive radio wave emission if the transmission power
and the frequency are set incorrectly during the Wi-Fi configuration.
Page 12 / 56
WARNING

Only qualified skilled personnel (e.g. IT personnel with good knowledge of
PCs, operating systems and wireless networks) may configure DLT-V6210.
The MDevice manual is available in the Download Center at
dlog.com.
CAUTION

Observe the applicable regulations for your deployment location/country
with regard to frequencies and the maximum permissible transmitting power.

Responsibility for this lies with the company who is operating DLT-V6210.
The regulatory authorities in the relevant country can provide information on
this.
DLT-V6210 Manual V1.00
www.advantech-
Advantech-DLoG