Table 3-5 Specifications - Toshiba G2020 Series Installation And Operation Manual

Rated Output kVA
Rated Output kW
AC INPUT
Configuration
Voltage
Frequency
Reflected Current THDi
STATIC BYPASS INPUT
Configuration
Voltage
Frequency
ENERGY STORAGE
Type
Ride Through
Nominal Voltage
Minimum Voltage
Number of Cells
AC OUTPUT
Configuration
Voltage
Voltage Regulation
Frequency
Frequency Regulation
Power Factor
Power Factor Range
Voltage THD
Transient Response
Transient Recovery Time
Voltage Unbalance
Phase Displacement
Inverter Overload
Bypass Overload
ENVIRONMENTAL**
Cooling
Operating Temperature
Relative Humidity
Altitude
Location
Paint Color
Clearance Required
**Indication that the unit is intended for installation in a temperature-regulated,
indoor area that is relatively free of conductive contaminants.
18

Table 3-5 Specifications

500
500
3 phase, 3 wire
480 V +15% to -20%
60 Hz ±10%
3% typ. at 100% load (no input filter required)
3 phase, 3 wire
480 V ±10%
60 Hz ±5%
Lead Acid, SCiB Lithium Titanate (LTO)
Application Specific
480 Vdc
400 Vdc
VRLA: 240, SCiB: Application Specific
3 phase, 3 wire
480 V
±1%
60 Hz
±0.01% in free running mode
Unity (nominal)
0.7 Lagging to 0.8 Leading (within output kW rating)
2% maximum THD at 100% linear load
5% maximum THD at 100% non-linear load
±2% maximum at 100% load step
±1% maximum at loss/return of AC power
±5% maximum at load transfer to/from static bypass
Less than 20ms
1% maximum at 100% unbalanced load
1 deg. maximum at 100% Load
125% for 1 minutes
150% for 10 seconds
500% for 1 cycle
(with bypass available)
Forced Air
32 F to 104 F (0 C to 40 C).
Recommended : 68ﾟF to 86ﾟF ( 20C to 30C)
5% – 95% Non-Condensing
0 to 6500 ft. (1981 m) No Derating at 104ﾟF (40ﾟC)
Indoor (free from corrosive gases and dust)
Munsell N1.5 (Black)
Top : 24 in. (610 mm)
Front : 40 in. (1016 mm)
Rear : 0 in. (0 mm)
Sides: 0 in. (0 mm) if sidecars used, 1 in. (25 mm) if no sidecars used.
G2020 Series UPS Installation and Operation Manual – 94861-004
750
750