Periodic Activation Of Loads - Ariston ELIOS 25 Manual

P10

: PERIODIC ACTIVATION OF LOADS

PRESS ' '. T E DISPLAY
This parameter permits to manage the periodic activation of
S O S 'P K' FLAS IN .
loads (pumps and valves) included in the hydraulic scheme
selected. In particular if a load has not been activated in 21
hours' time it will be automatically activated by the power
unit for 15 seconds according to the operation logic.
If a load is activated during this time gap the counting will
PRESS ARRO S ' ' and ' ' TO SET
start again from zero.
T E DESIRED ALUE.
The timers counting the waiting and activation time will not
be stored and counting will start again from zero in case of
reset or voltage lack.
The 'periodic activation of loads' function will be activated if
the P K parameter is 1 whereas it will be deactivated if the
PRESS T E ' ' KEY TO CONFIRM T E
parameter is .
PRO RAMMIN OR PRESS T E ' esc ' KEY TO CANCEL
T E C AN ES.
AFTER SELECTIN PARAMETER P1 PRESS
T E ' ' KEY.
Periodic activation of loads
Data Regulation range Default
P K .. 1 1
T E DISPLAY S O S ' P K '.
Note: ' 0 ' indicates that the periodic activation of loads is
deactivated, whereas ' 1 ' indicates it is activated.
35