SCH
20
Solar heating system with 1 tank, 2 sensors only and
supplemental heating excluded.
Control logic
?
WARNING!
All outputs are 230V~ powered and are NOT potential free.
P2
: SETTING THE THERMAL DATA
Using this parameter it is possible to set the thermal data
related to the selected installation:
The control unit is supplied with pre-programmed
thermal data for optimal operation. Any change to these
values must be performed by quali ed personnel only.
AFTER SELECTIN PARAMETER P2 PRESS
T E '
USIN T E
' or '
SCROLL CYCLICALLY T ROU
- Safety temperatures
- Differentials
-
ysteresis of the differentials
-
ysteresis of the safety thermostats
-
ysteresis of the thermostats
- Offset
- Maximum temperatures
- Integration temperature
- A C (Automatic oiler Control) temperature
24
' KEY.
' ARRO S IT IS POSSI LE TO
T E T ERMAL DATA: