Using Installer Parameters - Ariston ELIOS 25 Manual

INSERT T E NE PASS OR .
T E ISPLAY S O S ' P
INSERT NE PASS OR .
T E CONTROL UNIT ILL MEMORI E T E NE PASS OR
AN I E ACCESS TO T E INSTALLER PARAMETERS.
Pressing the ' esc ' key at any time will exit the password
management mode.

Using installer parameters

Inserting the correct Password gives access to the installer
parameters change mode (' SET ' icon lights). The rst
information displayed is the model of the control unit in use
and the parameter ' P1 ' value.
y pressing the ' ' or '
through the various parameters. Pressing the '
the user to the parameter modifying mode selected.
C '.
' keys it is possible to scroll
' key takes
11
To exit the installer mode press the ' esc ' key or wait
2 seconds.
WARNING!
In the ' installer parameters ' mode all the outputs are
disabled.
All default values are to be considered as indicative,
being they subject to changes due to the version and
without prior notice.
PRESS T E ' ' KEY ON T E START PA E.
T E ISPLAY S O S ' P
INSERT T E CURRENT PASS OR .
T E ISPLAY S O S T E FIRST
' INSTALLER PARAMETER '.
'.